Gillette GPE User Manual

LEADER IN KLEEN-POWER
BRUSHLESS
FOR GILLETTE PORTABLE GEN-SET MODELS: GPE, AND GPED,
WITH KW SIZES: 5.5, 6.5, 7.5, 9.5, 10.5, 12.5, 13.5, AND 15.0 KW
READ ENTIRE INSTRUCTION MANUAL FOR SAFE OPERATION OF
GENERATOR. ALSO READ SEPARATE AND INCLUDED ENGINE
MANUAL BEFORE ACTUAL USE. IT IS IMPORTANT FOR USER TO
KNOW HOW TO SAFELY START AND HOW TO SAFELY STOP
ENGINE,BEFORE ATTEMPT OF FIRST TIME USE.
NOTICE: GILLETTE GENERATORS PORTABLE PRODUCTS HAVE
BEEN CERTIFIED AND APPROVED BY THE ENVIRONMENTAL
PROTECTION AGENCY (EPA) TO MEET ALL STANDARDS FOR A
SAFE CLEAN OPERATING PORTABLE GENERATOR.
*CALIFORNIA PROPOSITION 65 WARNING *
ENGINE EXHAUST FROM THIS PRODUCT CONTAINS CHEMICALS
KNOWN TO CAUSE CANCER, BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM.
PORT-OWNERS-MAN-09252012
Using a generator indoors CAN KILL YOU IN MINUTES.
Generator exhaust contains carbon monoxide. This is a
poison you cannot see or smell.
NEVER use inside a home
or garage, EVEN IF doors
and windows are open.
Only use OUTSIDE and
far away from windows,
doors, and vents.
Avoid other generator hazards.
READ MANUAL BEFORE USE
OWNER’S MANUAL
PORTABLE GENERATORS SINCE 1972
DANGER
! !
*CALIFORNIA FUEL VAPOR WARNING*
IT IS MANDATORY TO INSTALL A FUEL VAPOR FILTER IN THE FUEL SYS-
TEM OF ALL PORTABLE ENGINE USE, FOR COMPLIANCE
TO CALIFORNIA
EPA LAW

Gillette GPE Specifications

General

Brand	Gillette
Model	GPE
Category	Portable Generator
Language	English

Summary

3. RULES FOR SAFE OPERATIONS

General Safety Precautions

Electrical Safety and Grounding

Instructions for proper grounding, GFCI protection, and handling electrical cords to prevent shock.

Load and Engine Operation Limits

Unsafe and Safe Operating Conditions

Lists conditions to avoid and conditions required for safe generator operation, emphasizing ventilation.

4. INSTALLATION

Outdoor and Indoor Installation Guidelines

5. PRE-START PREPARATIONS

Generator Grounding and Panel Overview

Grounding Procedures

6. LOAD APPLICATION

Load Application Guidelines

Guidance on calculating total load, comparing requirements, and connecting different load types.

Motor Load and Extension Cord Safety

Motor Starting Current and Cord Safety

Ground Fault Circuit Interruption (GFCI)

GFCI Protection and Usage Warnings

Explains GFCI protection, its unique features, limitations, and warnings regarding its use.

7. BEFORE STARTING

Pre-Start Disconnection and Checks

Steps including disconnecting loads, checking oil, fuel, and ensuring proper positioning.

GFCI Control Panel Feature

8. STARTING

Starting Procedure and Engine Warm-up

Detailed steps for starting, including fuel, choke, rope pull, and initial engine warm-up.

Initial Break-in Period

Caution on not applying full heavy electrical load during the first 3 hours for break-in.

9. STOPPING

Generator Stopping Procedure

Steps for safely stopping the generator, including removing loads and engine cool-down.

Battery Maintenance and Safety

Battery Charging and Safety Precautions

Fuel System and Safety Review

Electrical, Fuel, and Battery Hazards

Summary of hazards related to electricity, fuel, and batteries, including warnings.

Operating and Transporting Precautions

Key precautions for safe operation, refueling, and transporting the generator.

Refueling, Ventilation, and Component Safety

Safe Refueling and Ventilation Practices

Component Safety and Fuel Containers

GFCI Operation and Testing

GFCI Control Panel Test Procedures

Safety Rules and Support Information

Fuel Handling and Electrical Safety Review

GFCI Use and Initial Equipment Checks