of your physician.
③In no physiological alarm state, press any button to carry on the corresponding button function;
in audio alarm state, press any button (except 【ON/OFF】 button) to clear up the audio alarm.
④Take off the cuff, hold 【ON/OFF】 button to turn the device off.
*The device will automatically turn off after two minutes in which there is no operation to the
device, even if you forget to turn the power off.
Note
Wait at least 4-5 minutes between measurements.
When repeated measurements, because, the limb appears congestion, it may not get correct
blood pressure measurement. After the blood flow, take a measurement once again.
When some factors affect the measurement results in measurement process, error
messages hints will appear on the screen, you can obviate the malfunction and restart a
measurement.
To Next Page
Loading...