20
NOTE: If using the optional footbar, the
dedicated rescue handle with longer
plastic wire has to be used. Connect the
long plastic wire to the quick-release
footbar mechanism as detailed in the
instructions on page 13.
Installing the rescue in the harness rescue compartment
Using the line, pull the elastic loops through the ring of each rescue container flap. Close the
rescue container flaps in the order shown in the photos below. Secure the rescue container flaps
by placing the release pins through the elastic loops as shown. Insert each side of the rescue
handle in neoprene and secure with the attached Velcro.
1
3
4
2
To Next Page
Loading...
