EasyManua.ls Logo

Gin X - General Safety Warnings; Essential Safety Precautions

Gin X
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Read this entire manual before assembling or using your new GIN X electric bike.
Do not modify, disassemble, or replace the original electrical components on
your bike. Doing so will invalidate your warranty and could put you in danger.
Riding any type of bike comes with some risks which can’t be predicted or
avoided. Taking proper care of bike components can lower the risk of sudden
failure of components but cannot prevent it. These sudden failures could cause
serious harm, injury, or death to the rider. If you notice abnormalities in any
component on the bike, take it to a licensed mechanic to be repaired or
replaced immediately. GIN electric bikes assumes no liability for harm, injury, or
death of the rider. This manual is not intended to function as a detailed service
manual. GIN electric bikes recommends having your local bike shop mechanic
perform a detailed safety check of your e-bike before your first ride. Ensure your
local mechanic is experienced and reputable.
The GIN X can withstand most rain showers without sustaining damage.
However, the bike and its mechanical and electrical components are not
waterproof. We do not recommend storing or using the bike in wet conditions.
The warranty for the e-bike does not cover water damage.
For technical assistance or warranty claims contact our team at GIN electric
bikes at +44 7435 718906 or email at support@ginebikes.com