Windscreen (Part 1)
The windscreen is the last section of the attached canopy. It attaches
first to the front of the scooter and then to the rooftop. First locate and
install 2 large rubber grommets (p) into the lower holes and 4 (o)
medium rubber grommets into the upper holes. These grommets just
press into place, a screwdriver may be required to push them in
completely.
Secure the windscreen to the 2 mounts below the windshield brackets
with the shiny aluminum washers (q) and hex bolts (k) .
Mirrors
The mirrors for your scooter both attach to the windshield brackets and
secure your windshield into place.
16
To Next Page
Loading...
