Assembly Instructions
Your GIO Element arrives partially assembled and requires assembly
before use. For a complete assembly video from our technician
checkout the following video online for the step by step process
https://youtu.be/KeWwoIXZ1lE
To begin assembly, remove the scooter and all pieces from the metal
frame and box it arrived in. It is always best to save all packing
materials until assembly is complete to ensure no component is
accidentally discarded.
1) Wheels
Remove the nut and washer that comes pre installed on each of the
front axles. Lift the scooter and slide on each wheel, making sure to
follow the rotation markings on each wheel to ensure it is on the
correct side. Replace the washer and nut and tighten until secure.
8
To Next Page
Loading...
