To slow/stop your scooter, release the throttle and squeeze brake levers.
Always apply both brakes, especially when traveling at higher speeds.
Please note the motor cut out function of your scooter will automatically
deactivate the motor when brakes are applied to prevent motor wear.
⚠ Drive with care on slippery surfaces as it will increase the distance
needed to stop, allow extra room for braking. When driving downhill,
release the throttle & apply brakes to control the scooter’s speed. ⚠
The red button next to the throttle toggles through the 3 speed gears. The
vertical switch marked R N D changes between reverse, neutral and forward
driving. When switched into reverse the display will turn black and then
switch to the rearview camera to assist in reversing. Bring your scooter to
a complete stop before switching between forward and reverse.
12
To Next Page
Loading...