Your Golf arrives 90% assembled and requires the following to complete it.
We strongly recommend 2 people for assembly, as certain components are
large and will be more easily attached with support from a second person.
Step 1 - Unboxing
Unpack your Golf, remove the box by cutting along edges and peeling back
the cardboard. Carefully begin with the top most pieces, unfasten the bolts
in the shipping frame and remove pieces. All of the components should be
safely stored within the vehicle for travel.
Components include:
-Bumpers (front/rear), bumper hardware (x8 bolt - largest)
-Mirrors (left/right)
-Clear drip edging (left/right - self adhesive)
-Rear bench, bench support (black), hardware (x2 bolts - medium + x4
screws)
-Batteries (x5), brackets (green t-shaped x2), battery wires (x4), bracket
hardware (x4
bolts - medium), terminal bolts (x10 w/ spring washer & regular washer)
-Keys & fob (x2)
-Charger
Step 2 - Mirrors
Your mirrors are individually packed to protect them during shipping. Locate
the correct side mirror, remove the hex head bolts pre-installed into the
mounting on the door front, align the mirror with mounting holes and secure
into place with the removed bolts. Repeat on the other side.
05
To Next Page
Loading...