Trip distance per charge
reduced
Adjust tire pressure (40PSI)
Driving conditions (headwind,
slopes)
Avoid these conditions for best
performance
Adjust tire pressure (40PSI)
Bearing lubricant solidification
Repair/replace shaft/axle
Brakes not properly adjusted
Check power or use a different
outlet
Loose external connection
Check that charger is securely
plugged into wall socket and
charging socket on the scooter
Loose internal connection
Check connections near the battery
and charging socket, tighten loose
connections
The tips above are meant as a basic guide. Do not attempt to repair the scooter without
proper knowledge and skill. Please contact our technical support for help with any scooter
issues and possible solutions or seek the expertise of a local technician experienced in
scooter repair.
20