Gioteck VX-1 Quick Setup

1
2
3
4
5 6
VX
-
1 QUICK SETUP
1. Connect the VX-1 to your console via its charging lead.
2. Insert the usb dongle into a usb port on the console.
3. The LED on the dongle will flash quickly (slow flashing is
receiving mode not pairing mode).
4. Immediately press the home button on your controller.
5. All the LEDs on the controller will flash, and aer a short
time one (or two) will remain solid.
6. Immediately disconnect the charging lead from the
controller and the LEDs will flash again.
7. Repeat steps 4 & 5. (Sometimes pushing the home button
again will speed up this process. If the controller fails
to respond, repeat the process but make sure that you
disconnect the dongle and reinsert.)
8. To add multiple controllers (up to 7) or assign your
controller to a dierent port go to:
Accessory settings > Reassign controller.

Gioteck VX-1 Specifications

General

Device type	Gamepad
Gaming control technology	-
Gaming platforms supported	PC, Playstation 3
Gaming control function buttons	Select button, Start button
Connectivity technology	Wired
Product color	Black

Weight and Dimensions

Weight	- g