Need help?Do you have a question about the Girard Systems G-LINK and is the answer not in the manual?
Manual for Girard RV awnings focusing on the G-LINK system, motors, and controls.
Procedures for returning merchandise for repair, replacement, or credit.
Guidelines for submitting claims for parts and labor reimbursement.
Steps for inspecting and reporting shipment damages.
Lists applicable products and warranty durations for components.
Details specific warranty coverage and important operating safety advice.
Introduction to the G-Link system, its wireless technology, and system motors.
Overview of various control modules, their functions, and part numbers.
Explains GC136 receiver operation and remote control compatibility.
Step-by-step instructions for programming remotes and modes for the GC136.
Technical specifications and installation guidelines for the GC136 unit.
Details dual-channel control for Auto-Valance and light units.
Steps for programming remotes, canceling, and setting modes for GC228A.
Guidance on mounting and wiring the GC228A unit.
Instructions for installing the GC 74DC-F DC motor control unit.
Steps for programming manual remotes and modes for GC 74DC-F.
Describes the GC 732G DC motor control with optional LED controller.
Provides instructions for installing the GC 732G unit.
Details programming steps for the GC 732G with transmitters and remotes.
Explains the GC 135M sensor's purpose and mechanism for detecting wind movement.
Instructions for programming the GC 135M sensor to receivers and motors.
Details the GC779G sensor's role in preventing awning damage from wind stress.
Covers the installation and programming procedures for the GC779G sensor.
Describes the GC 135-I unit's function to send a "Retract All" signal.
Provides instructions for programming the GC 135-I to receivers and remote motors.
Explains the automatic retract and lockout feature linked to ignition.
Steps to program the 98GC135-IRL transmitter to receivers and remote motors.
Details the wiring connections for the 98GC135-IRL ignition lockout unit.
Describes the GC 116I's wireless anemometer function and wind speed settings.
Covers the installation and programming steps for the GC 116I anemometer.
Explains how the 98GC104DC interfaces dry contact systems with G-Link controllers.
Provides programming instructions for the 98GC104DC module to receivers and motors.
Details the functionality and range of various Girard remote controls.
Steps for programming remote controls to receivers, motors, and adding remotes.
Describes the functions of GC229 and GC230 wall switches.
Instructions for programming the GC229 and GC230 wall switches.
Information on battery-powered control units and their replacement process.
General| Brand | Girard Systems |
|---|---|
| Model | G-LINK |
| Category | Motorhomes |
| Language | English |
To Next Page
