GIRBAU EH080 Operating Instructions Manual

Program execution mode 12
Cod. 598144
Rev. 11/0717
4. PROGRAM EXECUTION MODE
4.1. Control panel
4.1.1. Machines with COIN CONTROL
Fig. 4.1
KEYS
A: Washing program selection
keys.
Each key corresponds to a
program. The selection of a
program is indicated by the
LED associated with the key.
B: The key: Program stop.
INDICATOR LIGHTS for a
program’s start sequence:
C: Phase of the program in
progress
D: Display
4.1.2. Machines with PROFIT PLUS CONTROL
Fig. 4.2
KEYS
A: Washing program selection
keys.
Each key corresponds to a
program. The selection of a
program is registered by the LED
associated to the key.
B: The key: Program stop.
C: Keys for selecting the extra
options
INDICATOR LIGHTS for a
program’s start sequence:
D: Phase of the program in
progress
E: Display

GIRBAU EH080 Specifications

General

Brand	GIRBAU
Model	EH080
Category	Washer
Language	English