GIRBAU HS-4040 User Manual

Cod. nº 407817
Rev. nº 01/0403
Manufacture date
Fecha fabricación
Date fabrication
Serial No.
Nº Fabricación
Nº Fabrication
ÇÇ
Notice
d'Instructions de
Fonctionnement
pour Laveuses
Versions Contrôle
PM
Manual de
Instrucciones de
Funcionamiento
para Lavadoras
Variantes Control
PM
Operation
Instructions
Handbook for
Washers
Control Version
PM
PM
Manufacturer
Fabricante
Fabricant
Dealer stamp
Sello distribuidor
Cachet distributeur
Ctra. de Manlleu, km. 1
08500 VIC (Barcelona) - SPAIN
Tel. (34) 93 886 1100
Fax (34) 93 886 0785
E-mail: girbau@girbau.es
http://www.girbau.com
GIRBAU, S.A.GIRBAU, S.A.
HS - 4007 800001
HS - 4012 810001
HS - 4022 830001
HS - 4040 850001
HS - 4055 860001
HS - 4110 870001
MODEL FROM MACHINE No.
MODELO A PARTIR MAQUINA Nº
MODELE A PARTIR MACHINE No.

GIRBAU HS-4040 Specifications

General

Brand	GIRBAU
Model	HS-4040
Category	Washer
Language	English

Summary

SAFETY INSTRUCTIONS

HAZARD SYMBOLS USED ON WASHER LABELS

SYMBOLS USED ON THE INSTRUCTION HANDBOOK

1. MACHINE DESCRIPTION

1.3. SAFETY DEVICES

2. OPERATION

2.1. DOOR LOCK AND OPENING

Explains the safe operation of the door locking and unlocking mechanism.

2.2. INITIAL START-UP

2.4. SUDDEN POWER FAILURE

2.5. DON’TS

2.6. PERSONAL PROTECTION EQUIPMENT

3.2. CONTROL PANEL

3.3. CONTROL DEVICES

3.4. DISPLAY INFORMATION

3.5. MACHINE CONFIGURATION

OPTIONS THAT CAN BE MODIFIED

Lists configurable machine settings to adapt to installation and user needs.

OPTION CONFIGURATION

3.5.a.- Hot water fill connection to the machine

3.5.b.- Heating

3.5.d.- Safety door lock system

3.5.h.- Inverter configuration

3.6. RETURN TO MACHINE´S BASIC CONFIGURATION. GENERAL ERASE.

3.8. CONFIGURATION OF OPERATION.

OPTIONS THAT CAN BE MODIFIED.

OPTIONS CONFIGURATION

3.8.b.- Programming of the dosing duration.

3.8.d.- Programmes operation permission.

4. MANUAL MODE

4.1. KEYS FUNCTION.

Explains the function of each numeric key for manual operation.

4.2. USE.

4.2.b. Dosing.

4.2.c. Water heating.

4.2.e.- Drain.

4.2.f.- Extract.

5. AUTOMATIC MODE. USE.

5.1. Wash programmes

5.2. WASH PROGRAMME EXECUTION

5.3. CHECKS DURING THE PROGRAMME.

5.4. PROGRAMME PUNTUAL MODIFICATIONS

5.5. PROGRAMMES CONTENTS AND REPORTS.

6. AUTOMATIC MODE. PROGRAMMING

6.1 INTRODUCTION

6.2. PROGRAMMING A PROGRAMME

6.2.a.- Water inlet.

6.2.b.- Water level.

6.2.c.- Water heating.

6.2.d.- Product dosing.

6.2.e.- Rotation type.

6.2.f.- Wash speed

6.2.i.- Water drain

6.3. OPTIONAL FUNCTIONS PROGRAMMING.

6.4. COPYING A PROGRAMME

6.5. PROGRAMME MODIFICATION

6.6. ERASING PROGRAMME CONTENT

6.7. ERROR REPORT

7. HAZARDS AND PREVENTION MEASURES.

ELECTRICAL HAZARDS

THERMAL HAZARDS

HAZARDS GENERATED BY NOISE

HAZARDS GENERATED BY VIBRATION

HAZARDS GENERATED BY MATERIALS PROCESSED, USED OR EXHAUSTED BY MACHINERY

HAZARDS CAUSED BY FAILURE OF ENERGY SUPPLY, BREAKING DOWN OF MACHINERY PARTS AND OTHER FUNCTIONAL DISORDERS

HAZARDS CAUSED BY TEMPORARY MISSING AND/OR INCORRECTLY POSITIONED SAFETY RELATED MEASURES/MEANS

8. MAINTENANCE

8.1. PROGRAMMED FOR PREVENTIVE MAINTENANCE

8.2. ALARM REPORTS. POSSIBLE OPERATION FAILURES

8.3. MAINTENANCE AND CORRECTIVE ACTION

Emergency stop verification.

Check the drain valve for leaks

Check drum shaft seals for leaks

Door lock manual unlock

9. SERVICE REMOVAL / DISMANTLING

10.1. MACHINE CONFIGURATION

10.2. OPERATION CONFIGURATION

10.3. PROGRAMMING