To Next PageTo Next Page
Need help?Do you have a question about the GIRBAU MS-617 and is the answer not in the manual?
Essential safety precautions for operating the washing machine to prevent injury or damage.
Explanation of hazard symbols found on the washing machine's labels.
Explanation of symbols used within the operation manual for clarity.
Detailed construction and functional characteristics of the washing machine.
Defines the intended purpose and limitations of the washing machine.
Overview of the washing machine's control panel and display elements.
Guidelines for properly loading fabrics into the washing machine.
Instructions for filling detergent and other products into the dispenser.
Step-by-step guide to initiate a wash cycle on the machine.
How to adjust or change a running wash program.
Overview of available wash programs and their general application.
Explains the symbols and values used in the wash program charts.
Details different methods for stopping or interrupting a wash cycle.
How the machine manages and prevents load unbalance during spinning.
Information on programming a delayed start for wash cycles.
Introduction to the advanced mode for personalizing machine operation.
Lists the different menus available within the advanced mode.
User-resolvable problems and their solutions, such as END/BAL or noises.
Explains display messages and probable causes for machine alarms.
Lists the various maintenance tasks covered in the section.
Instructions for cleaning the exterior and interior of the washing machine.
Guidance on how to clean the washing machine's door seal.
Steps and tools required to clean the electro valve filters.
Procedures for cleaning the detergent and bleach dispenser.
Instructions for cleaning the drain pump and its filter.
Procedure for checking the door lock and emergency stop safety features.
Recommendation for periodic professional overhaul of the washing machine.
Precautions and requirements for removing the washing machine from use.
Information on the materials used and the process of dismantling the machine.
General
