Modification of operation parameters 32
Cod. 598144
Rev. 11/0717
Locking the coin meter box
In UCM0 configuration, locking the coin meter box allows coins or tokens to be inserted at the beginning of the
cycle, regardless of whether the door of the machine is open or closed, or whether a program is selected.
The UCM-0 configuration is especially recommended for connecting the washing machine to the central
vending units.
In UCM-I configuration, locking the coin meter box allows coins or tokens to be inserted at the beginning of the
cycle only if the door is closed and a program has been selected.
Once the door has been closed and the program selected, there is a safety delay of 1 minute that makes it
necessary to select the program again if the payment has not been made before the specified time.
Tokens/ coins accepted regardless of the status of the door
and the program selected.
Tokens/ coins accepted only if the door has been closed and
the program selected.
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Order to start program
In PSH-0 configuration the washing programs will start when the number of tokens or coins inserted is equal to
the price shown on the display.
In PSH-I configuration pressing the key for the program selected once is required to start the program once the
value of it has been inserted in the unit coin meter.
Program start by paying its value
Program starts as a result of paying its value and pressing the
key for the program selected
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Suds prevention program
(Option available on EH020 and REM025 models only).
Certain detergents commonly used in some countries produce large quantities of suds and can complicate the
proper functioning of the wash programs.
To mitigate this difficulty it is advisable to use the suds-prevention options.
The levels of prevention 1, 2 and 3 modify the wash programs values (refer to section 6.2 on this manual).
The levels of prevention 2 and 3 execute as well additional options to increase the efficiency of rinses.
CAUTION!
THE ACTIVATION OF SUDS PREVENTION LEVELS 2 & 3 MEAN A SMALL INCREASE OF THE
PROGRAMME DURATION AND WATER AND ENERGY CONSUMPTION.
THE USE OF SOAP CHEMICALS WITH SUDS CONTROL IS RECOMMENDED. DO NOT EXCEED THE
RECOMMENDED DOSAGE.
To Next Page
