Need help?Do you have a question about the Gis GCH250 Series and is the answer not in the manual?
Details for contacting the manufacturer, GIS AG, for spare parts.
Information on how to acquire spare parts through an agent.
Overview of safety information and hazard precautions for operating the hoist.
Details on safety specifications, procedures, and personnel responsibilities.
Specific safety instructions for transport, assembly, connection, and start-up.
Details on hazards from mechanical influences and electrical energy.
Measurement of sound level (SPL) according to DIN 45 635.
Overview of technical data, recurrent checks, and warranty information.
Conditions under which the manufacturer's warranty is void.
Guidance on operating parameters and using the instruction manual.
Classification of hoists according to ISO Groups and operating conditions.
Illustrated description of the electric chain hoist components.
Illustrations and brief descriptions of special hoist models.
Safety directions for transporting and assembling the electric chain hoist.
Instructions for connecting the electric chain hoist to the mains power supply.
Instructions for oiling, installing, and housing the load chain correctly.
Instructions for adjusting gearbox limit switches for highest and lowest hook positions.
Steps for attaching the chain bucket and ensuring proper chain run.
Guidelines and precautions for performing maintenance and repair work on the hoist.
Table summarizing maintenance tasks and their frequency.
Table summarizing service tasks and their frequency.
Description of the spring-loaded single disk brake and its operation.
Procedure for checking load chain abrasion and wear factor tolerances.
Instructions for checking screw connections and shims for the limit stop.
Details on gearbox lubrication type, quantity, and compatibility.
Information on slip clutch setting, overload prevention, and authorized testing.
Guidance on periodically greasing bearing surfaces of suspension parts.
Information on how to order spare parts, referencing page 3.
Method for determining actual utilization period based on daily time and load collective.
Procedure for general overhaul of equipment after theoretical service life.
Detailed technical specifications for GCH series electric chain hoists.
Detailed technical specifications for GCHK series electric chain hoists.
Detailed technical specifications for GCHS series electric chain hoists.
Detailed technical specifications for GCHHK series electric chain hoists.
Detailed technical specifications for GCHHTD series electric chain hoists.
Detailed technical specifications for GCHR series electric chain hoists.
Details for contacting the manufacturer, GIS AG, for spare parts.
Information on how to acquire spare parts through an agent.
Overview of safety information and hazard precautions for operating the hoist.
Details on safety specifications, procedures, and personnel responsibilities.
Specific safety instructions for transport, assembly, connection, and start-up.
Details on hazards from mechanical influences and electrical energy.
Measurement of sound level (SPL) according to DIN 45 635.
Overview of technical data, recurrent checks, and warranty information.
Conditions under which the manufacturer's warranty is void.
Guidance on operating parameters and using the instruction manual.
Classification of hoists according to ISO Groups and operating conditions.
Illustrated description of the electric chain hoist components.
Illustrations and brief descriptions of special hoist models.
Safety directions for transporting and assembling the electric chain hoist.
Instructions for connecting the electric chain hoist to the mains power supply.
Instructions for oiling, installing, and housing the load chain correctly.
Instructions for adjusting gearbox limit switches for highest and lowest hook positions.
Steps for attaching the chain bucket and ensuring proper chain run.
Guidelines and precautions for performing maintenance and repair work on the hoist.
Table summarizing maintenance tasks and their frequency.
Table summarizing service tasks and their frequency.
Description of the spring-loaded single disk brake and its operation.
Procedure for checking load chain abrasion and wear factor tolerances.
Instructions for checking screw connections and shims for the limit stop.
Details on gearbox lubrication type, quantity, and compatibility.
Information on slip clutch setting, overload prevention, and authorized testing.
Guidance on periodically greasing bearing surfaces of suspension parts.
Information on how to order spare parts, referencing page 3.
Method for determining actual utilization period based on daily time and load collective.
Procedure for general overhaul of equipment after theoretical service life.
Detailed technical specifications for GCH series electric chain hoists.
Detailed technical specifications for GCHK series electric chain hoists.
Detailed technical specifications for GCHS series electric chain hoists.
Detailed technical specifications for GCHHK series electric chain hoists.
Detailed technical specifications for GCHHTD series electric chain hoists.
Detailed technical specifications for GCHR series electric chain hoists.
General| Brand | Gis |
|---|---|
| Model | GCH250 Series |
| Category | Lifting Systems |
| Language | English |
To Next Page
