Need help?Do you have a question about the Gison Machinery GPW-7 and is the answer not in the manual?
General| Model | GPW-7 |
|---|---|
| Working Pressure | 90 psi |
| Air Inlet | 1/4" |
| Sound Pressure | 85 dBA |
| Vibration | 2.5 m/s² |
| Power Source | Air Tool |
Explains rubber sleeve properties for grip and comfort during operation.
Describes the water shroud/guard for preventing water splash and user wetness.
Details the option to assemble the handle on either the right or left side.
Instructions for lubricating the gear through a side handle port for maintenance.
Explains how the water regulator adjusts water frequency for profiling needs.
Describes grip throttle for continuous operation and air regulator for air flow.
Details the safety lever to prevent accidental trigger activation.
Identifies the grease hole for lubrication of the tool's internal parts.
Explains the 3-hole spindle water exit for high performance and dust reduction.
Lists essential preparations before connecting the air hose to the compressor.
Provides instructions for attaching and setting up the sanding disc.
Describes how to check the switch function and ensure it's off before use.
Details on connecting the air hose securely from the compressor to the tool.
Instructions for performing a test run to ensure normal operation.
To Next Page