Gison GPW-7 - Tools Needed; Selection of Dismantling Tools; Tools For Disassembling Cylinder Assy.; Tools For Assembling Cylinder Assy.

1
Tools Needed
You will need the following tools
 Screw Driver
 14mm、16mm Spanner
 2mm Hex. Spanner
 Selection of Dismantling Tools
Tools For Disassembling Cylinder Assy.
Socket Fix Stand Bearing Diassembling Shaft
218027 7W050-4/218050-1 218050-2
6.1mm Shaft Bearing Diassembling Base Bearing Diassembling Base
218050-3 218050-5 218050-5
Tools For Assembling Cylinder Assy.
Rotor Disassembling Shaft Oil Compress Shaft Front Plate Base
218051-2 218051-3 218051-4
Bearing Compress
Shaft 1
Rear Plate Base
Bearing Compress
Shaft 3
218051-5 218051-6 218051-7
Tools For Assembling & Dissassembling
Special Spanner 36mm Open Spanner 32mm Open Spanner
7W050-1 7W050-2 7W050-3