Gison GPW-7 User Manual

GPW-7
Pneumatic Waterfed Sander
Maintenance Manual
GISON MACHINERY CO., LTD
No.2, Alley 105, Lane 68, Sec. 2,
Sinan Rd., Wurih, Taichung 414, Taiwan
Tel : 886-4-23353202
Fax : 886-4-23352252
E-Mail : gison@seed.net.tw
http://www.gison.com

Gison GPW-7 Specifications

General

Model	GPW-7
Category	Sander
Pad Size	4" (100 mm)
Free Speed/No Load Speed	4, 500 RPM
Air Inlet	1/4"
Vibration	2.5 m/s²
Water Feed	Yes
Sound Pressure	85 dB
Air Consumption	0.46 m3/min (16.2 CFM)

Summary

GPW-7 Pneumatic Waterfed Sander Maintenance Manual

Tools Needed

Selection of Dismantling Tools

Lists tools required for the selection of dismantling.

Tools For Disassembling Cylinder Assy.

Lists specific tools for disassembling the cylinder assembly.

Tools For Assembling Cylinder Assy.

Lists specific tools for assembling the cylinder assembly.

Tools For Assembling & Dissassembling

Lists general tools for assembly and disassembly tasks.

Steps Of Dismantling GPW-7

Maintenance Of Rubber Glue

Maintenance Steps For Shifting Post Assy.

Water Inlet Tube Maintenance

Steps for maintaining the water inlet tube component.

Shifting Post Maintenance

Procedures for maintaining the shifting post.

Maintenance Steps For Cylinder Assy.

Replacing Consuming Parts

Steps for replacing consumable parts of the cylinder assembly.

Dismantling Front Plate Assembly

Steps to dismantle the front plate assembly.

Dismantling Rear Plate Assembly

Steps to dismantle the rear plate assembly.

Assembling Cylinder Assembly

Steps for assembling the cylinder assembly.

Maintenance Steps For Spindle Assy.

Replacing Consuming Parts

Steps for replacing consumable parts of the spindle assembly.