Need help?Do you have a question about the GivEnergy W Series and is the answer not in the manual?
Insert the WiFi module into the USB port of the inverter or computer to power it.
Connect your computer to the WiFi module's network name (SSID) and click connect.
Access the dongle's IP address via a web browser to configure internet connection settings.
Configure WPA2-PSK security and set a password for the dongle.
Reconnect to the dongle with the new password and verify internet access.
Insert the SIM card into the dongle with the angled corner facing away from the device.
General| Number of MPPTs | 2 |
|---|---|
| Max. Input Current per MPPT | 13 A |
| Operating Temperature Range | -25°C to +60°C |
| Cooling | Natural Convection |
| Category | Inverter |
| AC Voltage Range | 230 V |
| Communication | Wi-Fi, Ethernet |
| Protection | Overtemperature |
To Next Page