If you want your router to have its own subnet, you need to choose WISP mode. If
you want to extend your existing network by bridging the mini router and your
current router wirelessly, you can use WDS.
You have to make sure your existing Wi-Fi supports WDS. Using WDS only if you know
what you are doing.
Repeater
B
Mode
Saved Networks
Internet Settings
Cable Repeater
Submit
3G/4G Tethering
Protocol
WISP
Password
SSID
WISP
WDS
Free Wi-Fi
Remember this network
Using Repeater means connecting your mini router to another existing wireless
network, e.g. when you are using Wi-Fi in hotels or other public locations.
Choose Repeater mode in your Internet Settings and your router will
automatically search for SSIDs. Choose a SSID and input the Wi-Fi password.
The repeater manager will remember a list of your used networks in Save Networks.
When your current wireless network is out of range, the manager will find another
available one from the list and switch the Repeater connection to it automatically.
To disable repeater manager, uncheck the box Auto scan & reconnect on the Internet
status page. In Saved Networks, you can delete or choose one from the list to
connect.
GL-AR750 Router is a dual-band router; when it works as a repeater, you need to
make sure that it uses the same frequency as the existing router does.
To Next Page
Loading...
Need help?
General