M
Mary RichardsonAug 1, 2025
What to do if water leaks at the push connect fittings in Glacier bay HDGROS4 Water Filtration Systems?
- AayersstevenAug 1, 2025
If you notice water leaking at the push connect fittings, it could be due to several reasons. First, ensure the tubing is pushed all the way into the fittings. If that doesn't solve it, check if the tubing is cut square. Also, inspect the tubing for any nicks; if present, remove the nicked portion before reinserting it. Finally, make sure the outer tubing surface is smooth; remove any rough portions before reinserting the tubing.