Glastar
To print out this manual: click the PRINT icon at the top
of your browser window or select print from the file menu.
G-8 All-Star Grinder
ALL-STAR GRINDER
G-8 MANUAL
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
FOR PERSONAL SAFETY THIS MACHINE MUST BE PROPERLY GROUNDED
The power cord of this machine is equipped with a three-prong (grounding) plug which mates with a standard
three-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard. Where a standard
two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have
it replaced with a properly grounded three-prong wall receptacle. DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUNDING) PRONG FROM THE POWER CORD.
Always unplug your machine before cleaning or making any repairs-(NOTE: We strongly recommend that you
return the unit to the factory for repair.) USE ONLY IDENTICAL REPLACEMENT PARTS TO REPAIR THIS
MACHINE.
SAVE THESE INSTRUCTIONS
OUTSIDE USA (818) 341-0301 · INSIDE USA (800) 423-5635
FAX (818) 998-2078 · WEBSITE www.glastar.com
EMAIL: info@glastar.com
EYE PROTECTION
When operating the grinder, always protect yourself against eye injuries
from flying glass. Install the glass eye shield that is furnished with this
To Next Page
Need help?
General