EasyManua.ls Logo

Glastender GT-18 User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation Manual
Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780
800.748.0423 · 989.752.4275 · Fax 989.752.4444 · www.glastender.com
GT-18 SerieS GlaSSwaSherS
GT-18, GT-18+1, GT-18+1L, GT-18+1R, GT-18+2, GT-18+2-IC and GT-18+3
(manufactured after August 2006)
© 2007 Glastender, Inc.
GT-18
GT-18+2
Rev. 3-29-07

Other manuals for Glastender GT-18

Question and Answer IconNeed help?

Do you have a question about the Glastender GT-18 and is the answer not in the manual?

Glastender GT-18 Specifications

General IconGeneral
BrandGlastender
ModelGT-18
CategoryDishwasher
LanguageEnglish

Summary

INTRODUCTION

WHAT IS A GLASSWASHER?

Explains the basic function of a glasswasher as a mechanized three-compartment sink.

WARRANTY

LABOR WARRANTY

Details warranty coverage for labor for different models and regions.

PARTS WARRANTY

Outlines warranty coverage for parts and field replacements.

UTILITY REQUIREMENTS AND CONNECTIONS

GENERAL PLUMBING REQUIREMENTS

Details water supply, pressure, temperature, and shut-off valve requirements.

DRAIN REQUIREMENTS

Specifies drain pipe size and type for optimal drainage.

ELECTRICAL REQUIREMENTS

Outlines voltage, phase, frequency, cord, and circuit requirements.

DETERGENT REQUIREMENTS

Specifies the type and concentration of detergent required.

SANITIZER REQUIREMENTS

Details the required sanitizer type and concentration.

RINSE AID REQUIREMENTS

Specifies the requirement for rinse aid.

INSTALLATION CONSIDERATIONS

Covers clearance, service access, and chemical container storage.

UNCRATING AND START-UP INSTRUCTIONS

CHEMICAL ADJUSTMENT PROCEDURE

Explains how to test and adjust detergent, sanitizer, and rinse aid levels.

OPERATION

THERMOSTAT CONTROL

Explains thermostat setting for cycle start and adjustment for low water temp.

LOW WATER PRESSURE ADJUSTMENT

Provides a modification for low water pressure issues.

EXPLODED VIEW OF GT-18 SERIES GLASSWASHERS

GT-18 WIRING DIAGRAM

GT-18+3 WIRING DIAGRAM

GT-18 WITH EXPORT TRANSFORMER WIRING DIAGRAM

USEFUL INFORMATION ABOUT WATER, DETERGENT, AND SANITIZER

WATER CONDITIONS

Classifies water hardness and its effect on detergent usage.

DETERGENT TITRATING INSTRUCTIONS

Step-by-step guide for titrating detergent concentration.

SANITIZER ADJUSTMENT INSTRUCTIONS

Instructions for testing and adjusting sanitizer levels.

IMPORTANT INFORMATION ABOUT CHEMICALS

TIPS FOR TROUBLE-FREE OPERATION

CLEANING INSTRUCTIONS

DAILY CLEANING PROCEDURE

Steps for daily cleaning of removable parts and interior.

DELIMING PROCEDURE

Steps to remove chalky deposits from the glasswasher interior.

TROUBLE SHOOTING GUIDE

Related product manuals