Gleener On the Go User Manual

www.gleener.com
Using the Gleener On the Go:
Step 1, Open: Holding the Gleener On the Go in both hands, push down on the release button.
Step 2, Switching Edges: Select the right Edge for the garment you wish to Gleen and secure
it by inserting the edge into the Edge cradle (A). An audible ‘click’ will indicate that the edge is
secured. To remove an edge from the storage dock (B), push down on one side of the edge until it
pops up. Note: one of the 3 fabric-safe edges will be in the in-use cradle at all times.
Step 3, Gleen: Simply lay the item on a flat surface (we recommend an ironing board) and hold it
taut with one hand. With the other hand, use gentle but firm strokes to remove the offending pills
and fuzz balls. Always Gleen in the same direction as the weave of the fabric.
The Gleener On the Go will quickly and efficiently remove pills from the fabric. These unsightly
fuzz balls will pile up, so periodically remove the accumulation from the edge with your fingers.
Repeat as necessary.
Finish with the velvet lint brush, and enjoy your newly revitalized garment!
INSTRUCTIONS
EDGE 1: Large, bulky pills. Best for: wool and wool/synthetic
blends.
EDGE 2: Medium to large pills. Best for: 100% synthetics and
blends such as acrylic, polyester, rayon, fleece; natural fibers
such as cotton, cashmere and merino wool.
EDGE 3: Fine, delicate pills and fabrics. Best for: silk blends,
fine cotton, natural and synthetic blends with elastane,
viscose and nylon.
Just choose your edge and get ready to Gleen! Numbers are marked on the bottom of each edge. For
best results Gleen on an ironing board.
IMPORTANT !
Gleener is NOT recommended for use on: ultra-fine fabrics such as “burnout” (cotton or
jersey) as it may damage your garment. Gleener should also not be used on fabrics that
contain embroidery, deliberate textures, or loose weaves and knits. Visit www.gleener.com for
more details. © All rights reserved. Patents pending.
1 2
A
B
3
on the
TM

Gleener On the Go Specifications

General

Brand	Gleener
Model	On the Go
Category	Electric Shaver
Language	English

Summary

Gleener On the Go Edge Types

Edge 1: For Large, Bulky Pills

Best for wool and wool/synthetic blends with large, bulky pills.

Edge 2: For Medium to Large Pills

Best for 100% synthetics, natural fibers, and blends with medium to large pills.

Edge 3: For Fine, Delicate Pills

Best for silk blends, fine cotton, and synthetic blends with elastane, viscose, and nylon.

How to Use the Gleener On the Go

Step 1: Open the Device

Hold the Gleener On the Go in both hands and push down on the release button to open.

Step 2: Switch and Secure Edges

Select the correct edge and insert it into the cradle until it clicks to secure.

Step 3: Perform Gleening

Lay fabric taut and use firm strokes in the weave direction to remove pills and fuzz.

Important Gleener Usage Precautions