Glen GL 4051 - Whisker Disc Operation; Disc Attachments for Processing

Using the Whisker Disc
Place the whisker disc onto
the food processor drive
shaft. Ensure that it seats
properly and settled down
low inside the bowl.
Add the food to be
processed like egg or cream
to the bowl. Place the bowl
cover over the food
processor bowl and rotate
anti-clockwise to lock. The
food to be processed can
also be added through the
feeder tube while the
machine is functioning.
Using the Discs
The chipping disc is used to
make finger chips. The
slicing disc is used to slice
vegetables or fruits. The
shredding disc can be used
for shredding vegetables
like carrot, cucumber,
potatoes or cheese. It can
also help shred vegetables
for chinese dishes. The
coconut shredding disc is
suitable for fine shredding
of coconut.
Select the disc, insert the
stem (Disc Drive) from below
and rotate clockwise to lock.
Now insert the disc onto the
drive shaft.
7 8
USING THE LIQUIDISER JAR
Remove the lid on the
liquidiser side by turning
clockwise. Place the liquidiser
jar on to the drive and rotate
anti-clockwise to lock.
Add the ingredients to be
processed. Place the lid on
top of the liquidiser jar and
rotate clockwise to lock the
slugs.
The liquidiser jar should not
be filled more than 2/3 of
the jar capacity. Switch ON
the machine and turn to
position 1. The pulse
position can be used for
additional froth in milk
shakes, coffee or lassi.
Once the operation is
complete switch OFF the
machine and remove the
liquidiser jar by rotating
clockwise.