Unplug the food processor
from the mains.
Disassemble the pusher,
bowl cover, bowl and
remove the blades/discs.
CLEANING THE BOWL, BLADES, COVER & PUSHER
Unlock the disc from the
stem. Clean the blades or
discs in tap water. Handle
these carefully as they have
very sharp edges.
When the appliance is
stored for long durations, it
is advisable to apply edible
oil on the SS cutting blade.
Wash the bowl, bowl cover
and the pusher in tap water.
Use soapy water and
sponge to remove oily
substances or deposits. Do
not use metal/nylon
brushes or boiling water.
13 14
CLEANING THE LIQUIDISER/ DRY GRINDER /
CHUTNEY JAR
Pour a little liquid soap and
water into the liquidiser /
chutney jar, close the lid
and run it on position 1 for a
few seconds.
Pour out the soap solution
and wash with tap water.
For the dry grinding jar
remove the contents from
the jar. Wipe the jar with a
dry cloth and store.
To Next Page