PV Glider Manual v. 2 rev B www.glidebikes.com 8 of 11
Before riding fast or in more difficult conditions, learn the function and performance of all the
mechanisms of your glider by riding at slower speeds in a flat, empty parking lot. Practice at
slow speeds first by walking along while seated on the bike.
Before your first ride:
Make sure your Glider fits your child properly.
Make sure there is adequate top tube clearance.
The minimum standover height is 1" (25mm). There should be at least one inch (25mm)
clearance between the top tube and the rider when standing over the glider.
Figure 1 - Minimum standover height: 1" (25mm)
Adjust the seat:
The seat should be adjusted so that the child can put both feet on the ground at the same
time.
The maximum the seat can be raised is where the seat tube indicator can be seen from the
top of the glider body. There is a an indicator line on the seat post that says max height
Check your bike before riding it:
Check that wheels are straight.
Check brakes.
Check attachment of both wheels.
Check handlebars and stem for signs of stress or fatigue.
If you are not certain if your bike has a problem or have questions, call Glide Bikes at 888-
723-7748.
To Next Page
Loading...