Glide Bikes Go Glider

To Next Page

PV Glider Manual v. 2 rev B www.glidebikes.com 1 of 11

Go Glider Manual

Congratulations on your purchase of the Go Glider! Your glider is designed for years of

nearly carefree use by your child. These instructions include how to set up your glider and

maintenance procedures which you should perform to ensure last lasting use and optimal

performance.

Important! Read all of these instructions before assembling or riding the glider. For

questions or help please call Glide Bikes at 888-723-7748.

Assembly Instructions

Tools needed for assembly:

Wrench (Figure 1) (Included)

Main Page

Need help?

Do you have a question about the Glide Bikes Go Glider and is the answer not in the manual?

Summary

Assembly Instructions

Tools needed for assembly

Lists tools required for assembling the Go Glider.

Installing Front Wheel

Step-by-step guide for attaching the front wheel to the glider.

Installing and Adjusting the Handlebar

Instructions for mounting and aligning the handlebars correctly.

Installing Foot Pegs

Details on how to correctly position and secure the foot pegs.

Before Riding

Before your first ride

Essential checks and preparations before the initial use of the glider.

Adjust the seat

Guidance on setting the correct seat height for the rider.

Check your bike before riding it

A pre-ride safety checklist for the glider.

Operation

Maintenance

Before every ride

Pre-ride checks to ensure the glider is safe and functional.

Monthly

Recommended maintenance tasks to be performed on a monthly basis.

Brake pad alignment

Procedures for ensuring the brake pads are correctly aligned for optimal stopping.

Warning

Critical safety warnings regarding riding practices and glider condition.