Need help?Do you have a question about the Glide Gear SNC 100 and is the answer not in the manual?
Connect the main telescopic pole, hinge, and chest plate to form the base structure.
Attach the arm and then the camera platform to the main assembly.
Connect and adjust side straps for optimal fit and height on the torso.
Utilizing shoulder straps for enhanced support and a slightly higher vest position.
Information on mounting the SNC 100 on the back of the torso.
Use the hinge at the camera platform base to adjust the camera's angle.
Adjust the distance between the torso and camera by modifying the clamp.
Modify the angle of the main telescopic pole relative to the chest plate.
The Glide Gear SNC 100 is a wearable camera support system designed to provide stable, hands-free camera operation, particularly for point-of-view (POV) shots or dynamic camera movements where the camera needs to be positioned close to the body. This device, often referred to as a "snorricam" rig, allows the camera to be mounted in front of, or sometimes behind, the user, capturing their immediate surroundings and reactions from a unique perspective. Its modular design emphasizes adjustability and ease of use, making it suitable for a range of filming scenarios from independent filmmaking to vlogging and action sports.
The primary function of the Glide Gear SNC 100 is to act as an extension of the camera operator's body, providing a stable platform for a camera while allowing the operator full freedom of movement. By distributing the camera's weight across the torso, it minimizes camera shake and provides a consistent framing relative to the operator's body. This is particularly beneficial for shots that require the camera to move with the subject's actions, such as walking, running, or performing specific tasks, without the need for a separate camera operator or complex stabilization equipment. The rig is designed to keep the camera at a fixed distance and angle from the operator's chest, ensuring a consistent field of view that captures the operator's perspective or their interaction with the environment. The system's adjustability allows for precise positioning of the camera, enabling users to achieve various creative shots, from wide-angle views encompassing the operator's arms and torso to tighter shots focused on objects in front of them.
The Glide Gear SNC 100 is engineered with several features to enhance its usability and adaptability in various filming situations:
Modular Assembly: The rig consists of several key components: a Main Telescopic Pole (A), a Main Hinge (B), a Front Chest Plate (C), an Arm (D), and a Camera Platform (E). These parts are designed for straightforward assembly, allowing users to quickly set up the system. The process involves sliding the Main Hinge onto the Main Telescopic Pole, connecting the pole to the Chest Plate, attaching the Arm to both the Main Hinge and Chest Plate, and finally inserting the Camera Platform into the Main Telescopic Pole. This modularity also facilitates compact storage and transport.
Adjustable Camera Positioning: A critical feature of the SNC 100 is its extensive adjustability, which allows users to fine-tune the camera's position and orientation.
Secure Camera Mounting: The Camera Platform (E) is designed to securely mount a camera, ensuring stability during movement. Users are instructed to mount their camera firmly onto this platform, which typically features a standard tripod screw for compatibility with most cameras.
Comfortable and Secure Vest System: The SNC 100 incorporates a vest-like system with a Front Chest Plate (C) and adjustable straps to ensure a comfortable and secure fit for the operator.
Pre-Use Tightening Protocol: Before putting on the vest, users are advised to tighten and lock all hinges and thumb screws into position. This crucial step ensures the rig's stability and prevents unwanted shifts or collapses during operation, safeguarding both the equipment and the operator.
While the manual primarily focuses on assembly and usage, several aspects imply maintenance considerations for the Glide Gear SNC 100:
Regular Inspection of Hinges and Clamps: The emphasis on tightening and locking all hinges and thumb screws before use suggests that these components are critical for the rig's structural integrity. Regular inspection of these parts for wear, damage, or loosening is implied to ensure continued safe and stable operation. Users should check that all locking mechanisms are functioning correctly and providing a secure hold.
Cleaning: As a piece of equipment used in various environments, the SNC 100 would benefit from regular cleaning. Wiping down the metal poles, plastic components, and fabric straps with a damp cloth can remove dirt, dust, and sweat, prolonging the life of the materials and maintaining hygiene. Care should be taken to avoid harsh chemicals that could damage the finishes or materials.
Strap Care: The adjustable straps are essential for comfort and security. Users should periodically check the straps for fraying, tears, or damage to the buckles and adjusters. Replacing worn straps or buckles would be necessary to maintain the rig's secure fit. Proper storage, avoiding excessive tension or sharp folds, can also help preserve the integrity of the straps.
Storage: When not in use, disassembling the modular components and storing them in a protective case or bag can prevent scratches, dents, and other damage. Keeping the components clean and dry will also prevent corrosion on metal parts and degradation of plastic or fabric elements.
Lubrication (as needed): While not explicitly stated, any moving parts, such as hinge pins or telescopic pole mechanisms, might benefit from light lubrication over time if they become stiff or difficult to adjust. However, this should only be done with appropriate lubricants that do not attract dust or degrade the materials.
Component Replacement: The modular nature of the SNC 100 suggests that individual components, if damaged, might be replaceable. This extends the lifespan of the entire system, as users would not need to replace the entire rig if only one part is compromised.
In summary, the Glide Gear SNC 100 is a versatile and adjustable wearable camera rig designed for dynamic, hands-free filming. Its user-friendly assembly, extensive adjustment capabilities, and secure vest system make it a practical tool for capturing unique perspectives, while implied maintenance practices ensure its longevity and reliable performance.
General| Type | Camera Slider |
|---|---|
| Length | 100 cm |
| Material | Aluminum |
| Load Capacity | 15 lbs |
| Carrying Case | Included |
| Compatibility | Camcorders |
| Mounting | 1/4-20 and 3/8-16 threads |
To Next Page