User & manufacturer serviceable parts
The only user serviceable parts are as per Section 12.
For safety, all other components are to be serviced by Glide Products or a trained
Technician.
Cleaning with High Pressure water clearner. WARNING!
Glide does not recommend using high pressure clearers but does concede that on
occasion it may be necessary. Before proceeding, all Electrical components should be
removed from wheelchair before using high pressure guns. All suspension pivot points
must be re greased using a Molybdenum base grease after cleaning. Never use alkaline
based solvents.
Packing & shipping
The Centro Power Chair is shipped to Glide Products agents in a fully enclosed pallet
mounted cardboard box to minimise damage during transport.
Your chair should arrive to you fully assembled and ready to use.
If your chair needs to be transported interstate or overseas, it is recommended that a
shipping box and pallet be used. These can be purchased from your nearest Glide
Products agent or dealer.
NOTE: As stated in our warranty, we recommend that your wheelchair be returned to
an authorized Glide Products agent for it’s free 3 month service check. This is a one off
free service calculated from date of purchase.
To Next Page
Loading...
