12
Armrests
The Flip up armrests are adjustable in height, position forward or aft of arm pad.
These can be permanently set in the desired position and locked with bolts or user
adjustable using locking knobs or thumb knobs.
To adjust height, loosen Turn Knob located on outside of armrest Post. When
adjustment is complete retighten Turn knob firmly.
Forward and Back Adjustment of Arm Pad
Loosen small turn knob located on the outside and underneath arm pad. Retighten when
adjustment is complete. Do not undo more than one turn. This knob also allows
adjustment of joystick module.
Flip Up Armrest Lock
Located on the inside of the armrest mount bracket. Pull knob out and turn 90 degree.
This will allow armrest to move freely up and down. To lock, turn knob 90 degrees and
allow knob to drop in. Drop armrest down and arm should be in the locked position.
To Next Page
Loading...
