13
Legrests and footrests
The footrests are swing away and detachable. They swing out by pulling the release
lever. When lever is released, the footplate will simply swing out and lift off the two
locating Pins.
When refitting footrest to wheelchair ensure that it is located on both locating pins.
Damage may result if only one pin is used. Once the legrest is on the locating pins and
with foot plates up, swing legrest towards centre of chair firmly so latch will click into
position.
Height Adjustment of Footplate
Your footplate will be fitted with one of two types of adjustment styles.
1. Clamp Type–to adjust height simply loosen clamp bolt, move to desired
position, retighten clamp bolt.
2. Incremental Hole Type–to adjust height simply un-do and remove bolt, move
footplate to nearest hole to suit desired height, replace and tighten bolt firmly.
To Next Page
Loading...
