9
Have an authorised Glide Rehabilitation Products agents make adjustments to the
controller if the chair is not performing to your satisfaction. There are no controller
adjustments that can be made by the user or carer apart from speed level selection.
Safety/Performance Check ⚠ Warning
Make sure the chair operates as it is designed to do.
If there is a change in the performance of the wheelchair or in your functional ability,
contact your nearest Glide Rehabilitation Products agent to reprogram the control
settings to match your needs. It is advisable to have these settings checked annually.
Check for any uncharacteristic noises, vibration or any difficulty in its use.
If a problem is found, notify your carer and Glide Product Agent for repair or advice on
how to repair. Do not drive it if your safety is at risk
Make sure that the batteries are fully charged before operating. Make sure all tyres are
inflated to recommended pressures and in good condition
Make sure all accessories are secure and in correct position
Check that the electronic brakes work correctly. (When chair is switched ON with drive
clutch engaged and hand off the joystick, the wheelchair should not be able to be
pushed.)
Wheelchair Modifications ⚠ Warning
Never make any modifications or use non-approved Glide Products parts on your power
chair. Doing so may cause a safety hazard and could void Warranty.
Unauthorised changes could constitute as remanufacturing of the power chair. This
voids any warranty. The person or group who make the changes will have full liability
of the power chair.
To Next Page
Loading...
