Charging your GLO Brilliant
™
Device How to use
• Attach small end of USB into the bottom of your control and connect
the other end into the power adapter. Plug power adapter into
electric outlet.
• Device blinks a brilliant blue when charging. Charge is complete when
all three bands are solid and no longer blinking.
• When device is fully charged, remove GLO
®
Control from power cord.
Lights will automatically turn off. You are now ready to GLO!
It takes just 4 hours to fully charge.
To start Gloing and Whitening
• One whitening session consists of four, 8-minute back-to-back
applications. A total of 32 minutes per day.
• Use one G-Vial per session. Each G-Vial contains enough gel for up
to four, 8-minute applications.
• Use GLO
®
for ve consecutive days. Results will vary depending
on your starting shade and genetics. You can whiten up to 10 days
if needed.
For optimal results:
• Brush teeth before you use GLO Brilliant
™
.
• Whiten for ve consecutive days. For optimal results, do not skip days
in between whitening.
• Avoid food or drinks that would stain a white shirt! Use Everyday GLO
pen to keep stains from setting.
Keep your smile white and bright
• You own your GLO Device now, and can keep your smile white all
year long. Touch up with one G-Vial (up to four applications) per
month or as needed.
Tip: Your GLO Control will only turn on when charged, connected to the
mouthpiece, and the GLO button is pressed. Traveling and on the go?
Charge your device on your computer.
Please register your device once opened. Visit gloscience.com/registration
1/3 charged 2/3 charged fully charged
To Next Page
Loading...
Need help?
General
