16
• It can be used on clean, dry skin or apply a cosmetic beforehand.
• I) Press the power button for 2 seconds to activate the device and the light therapy head. The lights underneath
the button indicate that it is on and the LEDs on the head will light up (the infrared will appear to be off because
they are not perceivable by the human eye). You can change the treatment LED light by pressing the power button
once, from red to green or blue.
II) Place the head on your face, and hold it until you hear a “beep” (30 sec). Move to another area.
III) When you finish your treatment, press the power button for 2 seconds to turn off the device.
• If desired, you can apply your favorite facial care products.
Note: This head can be applied to other areas of the body, such as the décolleté, hands, back or scalp.
To Next Page
Loading...
