GLO Face - How to Clean the Glo Face Device; General Cleaning Guidelines; Cleaning Specific Components; Massage Accessory Cleaning

19
HOW TO CLEAN Glo FACE
• Always clean Glo Face after each use.
• Glo Face must be turned off, not connected to the USB cable. Remove the head in use in order to clean the base thoroughly.
• IMPORTANT: Never use cleaning products containing alcohol, acetone, petroleum.
• Clean the metal rings and the gap between them with a cloth dampened with lukewarm water. Dry it with a towel or non-abrasive cloth.
• Clean the phototherapy head with a cloth dampened with warm water. Dry it with a towel or non-abrasive cloth.
• Massage accessory cleaning:
◦ The sponges are made of an anti-bacterial material to guarantee maximum hygiene, but after several uses it is advisable to wash them.
◦ The sponges can be removed for cleaning, and should not be washed without being removed first because the metal axis could be damaged.
◦ WARNING! Do not get the metal parts of the connecting axis wet.
◦ I) Remove the sponges carefully to avoid damaging them.
II) Wash the sponges with neutral soap and lukewarm water under running tap water. Squeeze them gently several times until the water runs out clean. Allow the
sponges to air dry before placing them back on the shaft.