GLO Glo910 User Manual

7 8
• Plug the device into the mains.
• Place the selected treatment head.
• Switch on the device by pressing the
power buon ❷.
• If desired, switch on the SLIMtech®
technology by pressing the buon ❺.
• Hold the device rmly, prevenng it
from turning around on itself, as this
could end up damaging the cable.
• Select the speed (from 200 rpm to
800 rpm) using the regulator ❸. Start
with a gentle speed, and increase ac-
cording to the sensivity to massage.
• Pass it slowly in circular movements,
avoiding pressing it against the skin
with excessive pressure.
• To drain, use the Cellu-Detox head
❽, slide it with upward movements
from the ankle to the groin, avoiding
touching the bones.
• To change the head, always turn o
the device by pressing the power
buon ❷.
Inserng and removing the head
a. To posion the head, insert the
selected head sha on the sha at
the base of the device, and secure
it by pressing the central buon of
the head ⓫. Pressing or forcing the
anchoring system is needless.
b. To remove the head, press the central
buon ⓫. Once released, pull it
outwards.

GLO Glo910 Specifications

General

Brand	GLO
Model	Glo910
Category	Personal Care Products
Language	English