EasyManua.ls Logo

Global Fire Equipment CHAMELEON NETWORK - User Manual

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Global Fire Equipment // globalfire.pt
ma_chmcomm_01_010001_en_191121
CHAMELEON NETWORK
INSTALLATION & COMMISSIONING MANUAL
OVERVIEW 3
CHAMELEON NETWORK KEY FEATURES 3
MULTI MASTER 3
NETWORKABLE PANELS 3
SYSTEM LIMITATIONS 4
TERMS and DEFINITIONS 4
IDENTIFYING COMPONENTS and COMMUNICATIONS 5
COMMUNICATION INTERFACES 7
INSTALLATION 8
INTRODUCTION 8
Mains Power connection 8
Control Panels and Repeaters Location 8
CHAMELEON NETWORK TOPOLOGY 9
Closed Loop Network example 9
Open Loop Network example 10
Mesh Network example 10
Extended display example (on non networked systems) 11
PANEL CONNECTIONS 12
RS422 connections example 13
FIBRE-OPTIC connections example 13
CHAMELEON REPEATER with double RS422 interface 15
Single TCP/IP Peer to Peer Connection 16
RECOMMENDED CABLES 16
COMMISSIONING 17
INTRODUCTION 17
GETTING THE PANEL/REPEATER RUNNING 17
NETWORK FUNCTIONS 18
1

Table of Contents

Questions and Answers

  • W
    Walter GutierrezAug 7, 2025
    How to verify remote devices on Global Fire Equipment Controller?
    • D
      Daniel MillerAug 8, 2025
      To verify remote devices on the Global Fire Equipment Controller installation, navigate to menu 7-1 Device Count, Type & Value. Here, you can check if all devices and panels are correctly displayed and recognized by the system.

Global Fire Equipment CHAMELEON NETWORK Specifications

General IconGeneral
BrandGlobal Fire Equipment
ModelCHAMELEON NETWORK
CategoryController
LanguageEnglish