Need help?Do you have a question about the Global Fire Equipment ORION PLUS and is the answer not in the manual?
General| Brand | Global Fire Equipment |
|---|---|
| Model | ORION PLUS |
| Category | Control Panel |
| Language | English |
Details the layout and components of the fire alarm control panel, including status indicators, keypad, and controls.
Explains the events and actions when the fire alarm control panel signals an alarm, including sounder and buzzer operation.
Outlines the procedure for resetting the system after an alarm or fault condition has been resolved.
Describes how to activate and silence all sounders on the installation, often used for evacuation drills.
Details how to view multiple queued messages for fire, fault, test, and disabled states on the LCD display.
Explains the function of sounder delays and how the DELAYS ACTIVE LED indicates their status.
Details how to perform a lamp test to verify the functionality of all LEDs and the LCD display.
Describes the procedure for conducting a fire drill, which involves activating and silencing the sounders.
Explains how to enter and exit the one-man walk-through test mode for detectors and call points.
Covers the general concept of disabling system features like sounders or zones.
Details how to selectively disable individual zones for specific operational needs.
Explains the procedure to disable all sounders on the system and the associated LED indication.
Describes how to enable and disable all relay outputs, affecting their behavior during alarm conditions.
Provides step-by-step instructions to enable or disable specific zones on the fire alarm panel.
Advises on the action to take when a fault is indicated by the STATUS - FAULT LED.
Guides on responding to a pre-alarm condition detected by the system, indicated by the PRE-ALARM LED.
To Next Page
