To Next PageTo Next PageWhat to do if my Global Industrial Electric Heater is not working?
If your Global Industrial Electric Heater isn't working, first check for any shorted wires; restart the heater after the inspection. Also, if the OCR (Over Current Relay) is activated due to an overload, restart the heater after pressing the reset button.
What to do if the heater switch lamp is not working on Global Industrial Electric Heater?
If the heater switch lamp on your Global Industrial Electric Heater isn't working, check for any shorted wires.
General| Brand | Global Industrial |
|---|---|
| Model | 256551 |
| Category | Electric Heater |
| Language | English |
Critical to keep safe clearance around heater and not block airflow. Keep objects away.
Built-in sensor automatically shuts off heater when it reaches abnormal temperature.
Heater switches off if it senses tilting and at risk of falling over.
Instructions for cleaning debris and dust from the heater using a blow-dryer or vacuum.
ON/OFF switch for main power. Protective sensors shut off heater automatically if hazards detected.
Control knob adjusts desired temperature. Heater operates until set temperature is reached.
ON/OFF switch for the heater. Requires specific shut-off procedure to prevent fire hazards.
Follow specific steps to turn off heater to prevent fire hazards: turn off heater, cool down, turn off power.
