Global Industrial 258321

To Next Page

INDUSTRIAL WALL FAN

WARNING

•

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY TO

PERSONS, OBSERVE THE FOLLOWING:

• This product contains chemicals which are

known to the state of California to cause

birth defects or other reproductive harm.

• Read and follow all instructions before

operating the product. Do not use the

product if any part is damaged or missing.

• Do not alter the product's assembly.

• All electrical connections should be made

by a qualified electrician. Installation

work and electrical wiring must be done

by qualified person(s) following all local

electrical and safety codes in the United

States and Canada, as well as the National

electrical Code (NEC) and the Occupational

Safety and Health Act (OSHA) in the United

States, and the Canadian Electric Code

(CEC) in Canada.

• Use OSHA approved lock-out tag-out

devices on power supply to prevent shock

and/or electrocution.

• When cutting or drilling into wall, do not

damage electrical wiring and other hidden

utilities.

do not expose to water or rain.

• To reduce the risk of fire or electrical shock,

do not use this product with any solid state

speed control device.

• To reduce the risk of fire or electrical shock,

do not use an extension cord, unit is

intended to be permanently hard wired to

properly rated electrical service outlet (120V

60Hz).

• To reduce the risk of injury to persons, install

product at least 7 feet (2.1m) above the floor

(8 feet in Canada).

•

• To reduce the risk of fire or electrical shock,

Automatically operated device - To reduce

the risk of injury, disconnect from power

supply before servicing.

4. Do not use the product in windows.

Rain and moisture may create electrical

hazard.

5. Disconnect the fan from its power source

when removing guards for cleaning.

6. This product is for indoor dry applications.

7. This product should not be operated

outside.

10.

The appliance does not apply to be used in

locations where special conditions prevail,

such as the presence of a corrosive or

explosive atmosphere ( dust, vapor or gas ).

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure

that they do not play with the appliance.

READ & SAVE THESE INSTRUCTIONS

RULES FOR SAFE OPERATION:

1. Never insert fingers or any other objects

through the grill guard when product is

in operation.

2. If the power supply cord is damaged,

contact your local service centre or a

qualified electrician to install an

appropriate replacement cord to prevent

any injury or damage.

3. Disconnect the product from its power

source when removing guards for

cleaning.

MODELS

258321 / 258322

607050 / 607051

All manuals and user guides at all-guides.com

Need help?

Do you have a question about the Global Industrial 258321 and is the answer not in the manual?

Summary

Safety Instructions

General Warnings and Precautions

Covers risks of fire, shock, injury, chemical exposure, and proper installation guidelines.

Safe Operation and Maintenance

Details safe handling, cord replacement, cleaning procedures, usage restrictions, and supervision.

Fan Assembly Steps

Mounting Bracket and Support Assembly

Illustrates the wall mounting bracket, angle support, and left/right support components for installation.

Motor and Back Shroud Attachment

Details the steps for attaching the motor and back shroud using specified hardware.

Fan Blade and Cover Shroud Installation

Explains how to install the fan blade and cover shroud with attention to the set screw.

Final Assembly and Adjustments

Covers latch hold down, pull chain, power cord, and angle/oscillation adjustment mechanisms.

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Safety Information (Key Warnings and Rules)

This document provides the user manual for the GLOBAL INDUSTRIAL Wall Fan, covering models 258321, 258322, 607050, and 607051. It outlines essential safety information, assembly instructions, and operational features for the device.

Function Description:

The GLOBAL INDUSTRIAL Wall Fan is designed to provide air circulation in indoor, dry applications. It is a permanently hard-wired device intended for fixed installation on a wall, offering adjustable airflow direction and oscillation capabilities. The fan is equipped with a 3-speed pull chain for operational control. Its primary function is to move air efficiently within a designated space, contributing to ventilation and comfort.

Important Technical Specifications:

Models Covered: 258321, 258322, 607050, 607051.
Power Requirement: 120V, 60Hz. The unit is intended to be permanently hard-wired to a properly rated electrical service outlet.
Installation Height: Must be installed at least 7 feet (2.1m) above the floor (8 feet in Canada) to reduce the risk of injury.
Speed Control: 3-speed pull chain.
Mounting: Wall-mounted using a Wall Mounting Bracket and Angle Support Bracket. Wall mounting hardware is NOT supplied by Global.
Components: The fan assembly includes a motor, fan blade, back shroud, cover shroud, and various fasteners (Phillips Hex Bolts, Plain Washers, Split Washers, Hex Nuts, Hex Nylon Lock Nuts, and a Hex Key).

Usage Features:

Adjustable Angle: The fan's angle can be adjusted using a locking screw and an angle adjustment screw, allowing users to direct airflow as needed.
Oscillation Function: The fan features an oscillation function, which can be engaged or disengaged. When engaged, the fan sweeps from side to side, distributing air over a wider area. This is controlled by a M6 x 1.0 Phillips Shoulder Screw, which can be set to "OSCILLATE" or "FIXED."
Multi-Speed Operation: A 3-speed pull chain allows users to select different fan speeds to suit their comfort and ventilation requirements.
Permanent Installation: Designed for permanent installation, ensuring stability and consistent performance in its designated location.
Indoor Use Only: Specifically designed for indoor, dry applications, preventing electrical hazards associated with moisture.

Maintenance Features:

Guard Removal for Cleaning: The user manual specifies that the fan must be disconnected from its power source when removing guards for cleaning. This highlights that the guards are removable, facilitating access to the fan blade for maintenance and cleaning.
Motor Shaft Tightening: Before assembling the cover shroud, the set screw must be tightened to the motor shaft. This is a critical step to ensure proper and safe operation, preventing the fan blade from becoming loose.
Replacement Parts: In case the power supply cord is damaged, users are instructed to contact a local service center or a qualified electrician for an appropriate replacement cord, indicating that specific components are replaceable by qualified personnel.
General Maintenance: The manual emphasizes the importance of ensuring all nuts and bolts are fully tightened after assembling the fan to the bracket, which is a key aspect of routine maintenance to maintain structural integrity and safety.

Safety Information (Key Warnings and Rules):

Chemical Warning: The product contains chemicals known to the state of California to cause birth defects or other reproductive harm.
Installation: All electrical connections and installation work must be performed by qualified electricians following local, state, and national electrical and safety codes (NEC, OSHA, CEC).
Power Disconnection: Always disconnect from the power supply before servicing or removing guards for cleaning.
No Solid State Speed Control: Do not use with any solid-state speed control device.
No Extension Cords: The unit is intended for permanent hard-wiring; extension cords should not be used.
No Water/Rain Exposure: Do not expose to water or rain to reduce the risk of fire or electrical shock.
No Obstruction: Never insert fingers or any other objects through the grill guard when the product is in operation.
Hidden Utilities: Exercise caution when cutting or drilling into walls to avoid damaging electrical wiring and other hidden utilities.
Automatic Operation: The device is automatically operated; disconnect from the power supply before servicing.
Supervision: Not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised. Children should be supervised to ensure they do not play with the appliance.
Environmental Restrictions: Not for use in locations with corrosive or explosive atmospheres (dust, vapor, or gas).
Damage: Do not use the product if any part is damaged or missing. Do not alter the product's assembly.