globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
Instruction Manual Manual de Instrucciones Manuel d'instruction
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
Service à la clientèle
Canada: 888-645-2986
1
032416
Portable Ventilator Fan
DANGER:
• Do not submerge motor or expose motor to water.
• Never handle the fan or motor with wet hands or when
standing on wet or damp surface or in water.
WARNING:
• Electric shock hazards - May cause severe personal injury
or death. For your safety, turn off electric power supply before
installing. Unplug unit before moving or servicing your fan.
Never make adjustments to the fan when power is on.
• Do not remove the power supply cord, ground prong or
ground fault unit. Do not alter power cord. For your personal
safety, the fan must be grounded. Removal or tampering of
power cord will void warranty. Never use an extension cord
to connect the fan to an outlet. All installations must be made
into a grounded outlet. Unplug the fan when not in use.
• To reduce the risk of fire or electrical shock, do not use this
fan with any solid state speed control device. This plug is
intended to fit an outlet only one way. If this does not fit outlet,
contact a qualified electrician. Do not attempt to bypass this
procedure.
• If the power supply cord is damaged, contact a qualified
electrician to install an appropriate replacement cord to
prevent any injury or damage.
CAUTION:
• Read and follow all instructions before operating fan. Do not
use fan if any part is damaged.
• Appliance should not be used in locations where corrosive or
explosive atmosphere (dust, vapor or gas) exists.
• Never insert fingers or objects through the grill guard when
fan is in operation. Disconnect the fan when removing guard
for cleaning.
• Make sure the fan is on a stable, flat surface when in operation.
•
Do not use fan in windows. Rain may create an electrical hazard.
MAINTENANCE AND STORAGE
• To keep the fan clean, use a dry cloth to wipe the surface
of the fan.
• Do not clean the fan with a chemical solution as this may
damage the coating and plastic parts.
• Never clean the fan in water.
• Fan should always be stored indoors.
FEATURES:
• Large capacity E-class motor.
• Specially designed axial propellers.
• High static pressure.
• High flow rate.
• Excellent strength.
IMPORTANT SAFETY INFORMATION:
Instruction Manual
2
Attaching Duct
to Ventilator Fan
Blade Static
Size” Model
Dia. Voltage Frequency Phase Poles Watts Flow Rate RPM Pressure
(mm) (V~) (Hz) (W) CFM
8 246340
200 120 60 1 2P 165 1589 3300 480
2 246343
300 120 60 1 2P 430 2931 3300 520
16 292605
400 120 60 1 2P 720 3284 3250 450
Models 246340 246343 292605
Untie string to
unfold ducting.
Wrap the quick-connect end over
the edging of blower fan.
Note: Wrap ducting over air outlet
for ventilation or over the air inlet
for exhausting applications.
Pull the strap
and adjust the
buckle over the
duct edging to
secure duct
in place.
Model Length Ft. Description
292601 16 For 8” Fan (Model 246340)
292602 32 For 8” Fan (Model 246340)
292603 16 For 12” Fan (Model 246343)
292604 32 For 12” Fan (Model 246343)
292595 16 For 16” Fan (Model 292605)
292596 32 For 16” Fan (Model 292605)
1
3 4
2
Open & unfurl the quick-connect
end of ducting.
Note: Quick-connect end includes
strap and buckle.
5
Fully extend length of ducting and
lay on floor or flat surface.
To Next Page
Need help?
General
