Global 246340 - User Manual

Customer Service
1-800-645-2986
Read and Save
These Instructions
globalindustrial.com
• Do not submerge motor or expose motor to water.
• Never handle the fan or motor with wet hands or when
standing on wet or damp surface or in water.
• Electric shock hazards - May cause severe personal injury
or death. For your safety, turn off electric power supply
before installing. Unplug unit before moving or servicing
your fan. Never make adjustments to the fan when power
is on.
• Do not remove the power supply cord, ground prong or
ground fault unit. Do not alter power cord. For your
personal safety, the fan must be grounded. Removal or
tampering of power cord will void warranty. Never use an
extension cord to connect the fan to an outlet. All
installations must be made into a grounded outlet. Unplug
the fan when not in use.
• To reduce the risk of fire or electrical shock, do not use this
fan with any solid state speed control device. This plug is
intended to fit an outlet only one way. If this does not fit
outlet, contact a qualified electrician. Do not attempt to
bypass this procedure.
• If the power supply cord is damaged, contact your local
service center or a qualified electrician to install an
appropriate replacement cord to prevent any injury
or damage.
• Read and follow all instructions before operating fan. Do not
use fan if any part is damaged.
• Appliance should not be used in locations where corrosive
or explosive atmosphere (dust, vapor or gas) exists.
• Never insert fingers or objects through the grill guard when
fan is in operation. Disconnect the fan when removing guard
for cleaning.
• Make sure the fan is on a stable, flat surface when
in operation.
• Do not use fan in windows. Rain may create an
electrical hazard.
MAINTENANCE AND STORAGE
• To keep the fan clean, use a dry cloth to wipe the surface
of the fan.
• Do not clean the fan with a chemical solution as this may
damage the coating and plastic parts.
• Never clean the fan in water.
• Fan should always be stored indoors.
FEATURES:
• Large capacity E-class motor.
• Specially designed axial propellers.
• High static pressure.
• High flow rate.
• Excellent strength.
Portable Ventilator Fan
Operation Manual
Models
246340
246343
DANGER
WARNING
CAUTION
IMPORTANT SAFETY INFORMATION:
Blade Static
Size” Model Dia. Voltage Frequency Phase Poles Watts Flow Rate RPM Pressure
(mm) (V~) (Hz) (W) CFM
8 246340 200 120 60 1 2P 165 1589 3300 480
12 246343 300 120 60 1 2P 430 2931 3300 520
Portable Ventilator Fan Operation Manual 8/5/10 2:40 PM Page 1

Summary

Important Safety Information

DANGER

High-risk warnings regarding water submersion and handling the fan with wet hands.

WARNING

Critical warnings concerning electric shock, grounding, and power cord modifications.

CAUTION

Precautions for safe operation, environmental considerations, and handling.

Maintenance and Storage

Features

Attaching Duct to Ventilator Fan

Step 1: Unfold Ducting

Untie the string to unfold the ducting for preparation.

Step 2: Extend Ducting

Fully extend the ducting length and lay it on a flat surface.

Step 3: Prepare Quick-Connect End

Open and unfurl the quick-connect end of the ducting.

Step 4: Attach Duct to Fan

Wrap the quick-connect end over the fan's edging for air outlet or inlet.

Step 5: Secure Ducting

Pull and tie the string over the duct edging to secure it in place.

Global 246340 Specifications

General

Brand	Global
Model	246340
Category	Fan
Language	English