To Next PageTo Next Page
Need help?Do you have a question about the GlobalTestSupply Druck UPS-II and is the answer not in the manual?
Power| internal loop power | 24 VDC stabilized |
|---|---|
| external loop power | 48 VDC max. |
| battery | 4 x 1.5V alkaline or rechargeable size AA |
Operating Environment| operating temperature | -10°C to 50°C |
|---|---|
| storage temperature | -20°C to 60°C |
| temperature effect | 0, 003%/°C |
Electrical Specifications| range | 0 to 22.2 mA |
|---|---|
| accuracy | 0, 05% of range |
| resolution | 10 microamps |
Weight and Dimensions| weight | 212 grams |
|---|---|
| size | 77 x 124 x 21 mm |
To output fixed calibration currents in series using the device.
Details on stepping in valve mode and selecting start currents.
How to output continuous up/down ramp cycles and select start direction.
Step-by-step instructions for replacing the instrument's batteries.
Diagram showing switch positions for current reading.
Diagram showing switch positions for transmitter calibration.
Diagram illustrating switch positions for transmitter simulation mode.
Diagram showing switch positions for valve stroking function.
General calibration period, test equipment suitability, and environment.
Accuracy requirements for calibration equipment and the UPS-II.
Step-by-step instructions for calibrating the measure mode.
Step-by-step instructions for calibrating the source mode.
Final steps after calibration, including equipment disconnection and record updates.
