Use provided USB-C charging cable, or any third-
party certified USB-C charging cable to charge the
LED Neck Reading Light.
Make sure to fully charge till the three charging
indicator lights at the back turn stable from flashing
before first use.
Please long press the power button until a green
indicator light at the bottom lights up. It means the
30-minute timer function starts, and the light will go
out automatically after 30 minutes.
Please charge it at least once every 6 months to
maintain the battery's lifespan.
Please avoid placing this light in an extreme
temperature environment (either too hot or too
cold).
Disposal: When you are ready to dispose of the
product after wearing it out, please make sure to
follow the instructions of your local government for
environmental and safety purposes.
Simply plug the provided USB-C cable into the
charging port on the top, and connect it with a
power charger.
It takes about 3.0 hrs to fully charge.
Please fully charge the product before first use.
1.
2.
3.
Note: The green charging indicating lights remain
flashing when the reading light is on charging, and
the green charging indicating lights will be stabled
when it is fully charged.
Note
How to Charge
To Next Page
Loading...