To Next PageTo Next Page
Need help?Do you have a question about the Glow Brand C140 and is the answer not in the manual?
General| Brand | Glow Brand |
|---|---|
| Model | C140 |
| Category | Boiler |
| Language | English |
Safe, reliable operation depends on professional installation per manual and authority requirements.
Outlines conformance to codes, manual, and standards for installation.
Explains de-rating capacity for boilers installed at elevations above 2000 ft.
Steps to take immediately if a gas leak is detected.
Warnings about storing and using flammable liquids near the appliance.
Specifies minimum distances from combustible construction for appliance installation.
Explains the risk of burns from hot water at different temperatures.
Advises on setting water temperatures to minimize scald risk.
Suggests installing a tempering valve to prevent scalding injuries.
Provides detailed specifications for C95 and C140 models.
Illustrates physical dimensions and connection points for C95 and C140 models.
Details pump curves and pressure drop characteristics for the C95 model.
Recommendations for selecting an appropriate indoor location for the boiler.
Instructions for securely mounting the boiler unit to a wall.
Explains certification and requirements for venting the appliance to the outdoors.
General guidelines for proper venting system installation and setup.
Details on installing a direct vent system for combustion air and exhaust.
Outlines rules for vent placement, separation, and protection.
Explains condensate production, trap function, and system setup notes.
Important notes on water quality, additives, and preventing corrosion.
Covers gas piping requirements, sizing, and installation procedures.
Steps to take before turning on gas and lighting the boiler.
Detailed procedure for checking gas pressure using a manometer.
Steps for filling the heating loop with water and purging air.
Procedure for initial startup, testing ignition, and safety shutoff functions.
Procedure for calibrating burner operation using a combustion analyzer.
Explains how lockouts are indicated, displayed, and cleared.
Describes how blocking errors are indicated, displayed, and the conditions for clearing them.
Steps to diagnose issues when the boiler is not operating.
Detailed checklist for annual servicing and inspection of the boiler.
Instructions for cleaning the combustion chamber and heat exchanger.
Step-by-step guide for replacing the gas valve.
