
Do you have a question about the Glow-worm Compact 24c-AS/1 and is the answer not in the manual?
Specifies the product's intended use for heating and domestic hot water generation.
Details requirements for qualified personnel for installation, conversion, and setting.
Covers crucial safety advice on gas, flue gas, material damage, and handling, to prevent hazards.
Explains the Benchmark Scheme for installation, commissioning, and servicing of heating systems.
Overview of the product's display and control interface for operation and monitoring.
Details the meaning of various symbols shown on the product's display.
Information on locating the product's data plate and serial number.
Explains the CE marking indicating compliance with applicable directives.
Describes how to adjust settings and navigate menu items.
Instructions on how to set the desired heating flow temperature.
Guidance on adjusting the domestic hot water temperature setting.
Procedure for disabling heating mode for seasonal operation.
Advice on cleaning the product casing using appropriate methods.
Highlights the importance of annual inspections by a competent person.
Procedures for checking and topping up the heating installation pressure.
Instructions for regularly checking the condensate discharge pipe and tundish.
Guidance on identifying and resolving common fault codes displayed by the product.
Steps to reset the product after a fault has occurred.
Procedure for safely shutting down the product for a temporary period.
Instructions for permanent removal of the product by a competent person.
Details on how to obtain information regarding the manufacturer's guarantee.
Provides contact details for the customer service department.










