To get going follow these easy steps:
1. Remove lightset from box.
2. Attach light to the mount you wish to use.
3. Connect battery to the light (turn battery to correct
position for CX Models.
4. Click the button to operate the light.
TURN OFF
Press for ~5sec from any level
Low Medium High Dim
Low High
Flash
Light Off
Battery Connected
Single
Click
Trail Mode
Double
Click
Commuter
Mode
Press for ~2 sec for FLASH
Click to return to LOW
Press for ~2 sec for DIM
Click to return to LOW
Click
Click
Click
Click
Click
For comprehensive instructions
scan the QR code or visit
www.glowormlites.co.nz/support
Create Your Escape
Basic Operation
To Next Page
Need help?
General