GLP YPOC 250 - Preparation and Installation; Mounting

GLP  German Light Production (V1.6) 7
2 Preparation and Installation
2.1 Mounting
The
Y
Y
P
P
O
O
C
C
2
2
5
5
0
0 is fully operational whether it hangs or is mounted to the wall. It
can also be operated while standing on the floor. Keep a safety distance of 0.5 m
towards any easy inflammable materials (decoration etc.). Install a safety wire that
can hold at least 10 times the weight of the fixture. Never use the carrying handles
for secondary attachment.
Pay attention to the regulations of: BGV C1 (former VBG 70)
and DIN VDE 0711-217. Regulations of show laser BGV B2
(11.2001), E DIN 56912 part 6, DIN-EN 60825 part 1+2.
The installation should be done by qualified staff only.
2.1.1 Clamps
Use two clamps on the backside of the
Y
Y
P
P
O
O
C
C
2
2
5
5
0
0 to mount the unit on a
truss (each two opposite threads max. M10x20). See also printing on the
backside of the case.
2.1.2 Mounting plate
For a permanent installation of the
Y
Y
P
P
O
O
C
C
2
2
5
5
0
0 you can use a optional
mounting plate to fix the unit on a wall. The plate uses 4x screws M6x20.